smart

The user friendly SMART2 Colorimeter is the direct reading colorimeter for complete on-site water analysis.

All pre-programmed tests can be run on this compact instrument and each test features automatic wavelength selection. The entire multi-LED optical system is embedded in the light chamber and optimized for LaMotte test reagent systems. This enables the analyst to simply select the test and put in the sample with reagent. The microprocessor, which selects the wavelength, also allows the user to load up to 10 tests for analyzing custom reagent systems.

Over 50 pre-programmed water analysis factors
Automatic wavelength selection
Friendly menu-driven operation with simple six button keypad
Accepts COD vials and cuvettes

Specifications:

Light Source: LED/filter setup at 430nm, 520nm, 570nm, 630nm

Detector: Photodiode

Display: 122x32 LCD, 16x4 line graphics display

Range: 0-125%T

Resolution: 1% FS

Accuracy: 2% FS

CE Mark: Yes

Sample Cell: 25 mm round cell, 10 mm square cuvette, 16mm COD tubes

Power: 9V or AC adapter

Battery Life: 500 tests

Datalogging: RS-232, time and date stamped

Calibration: Factory set

Keypad 6-button membrane switch

Size 15 x 8 x 5.5 cm; 6 x 3.25 x 2.5 inches

Weight: 900 g (2 lbs.)

Test Factor
Range

Aluminum
0–0.3 ppm

Ammonia Nitrogen LR
0–1.0 ppm

Ammonia Nitrogen HR
0–3.0 ppm

Bromine LR
0–9.0 ppm

Chlorine
0–4.0 ppm

Chlorine Dioxide
0–7.0 ppm

Chromium
0–1.0 ppm

COD, Low
0–150 mg/L

COD, Standard
0–1,500 mg/L

COD, High
0–15,000 mg/L

Copper (BCA) LR
0–3.5 ppm

Copper (DDC)
0–6.0 ppm

Cyanide
0–0.5 ppm

Cyanuric Acid
0–200 ppm

Dissolved Oxygen
0–11 ppm

Fluoride
0–2.0 ppm

Hydrazine
0–1.0 ppm

Hydrogen Peroxide LR
0–1.5 ppm

Iodine
0–14.0 ppm

Iron (Bipyridyl)
0–5.0 ppm

Iron (1,10-Phenanthroline)
0–5.0 ppm

Lead
0–5.0 ppm

Manganese LR
0–0.5 ppm

Molybdenum HR
0–50 ppm

Nickel
0–0.8 ppm

Nitrate Nitrogen LR
0–3.0 ppm

Nitrite Nitrogen LR
0–0.8 ppm

Ozone LR
0–0.4 ppm

pH (CPR)
5.0–7.0

pH (PR)
6.6–8.4

pH (TB)
8–9.5

Phenols
0–6.0 ppm

Phosphate HR
0–70 ppm

Phosphate LR
0–3.0 ppm

Potassium
1.0–10.0 ppm

Silica LR
0–4.0 ppm

Silica HR
0–75 ppm

Sulfate HR
0–100 ppm

Sulfide LR
0–3.0 ppm

Tannin
0–10 ppm

Turbidity
0–400 FTU

Zinc LR
0–3 ppm

Specifications:
Light Source:	LED/filter setup at 430nm, 520nm, 570nm, 630nm
Detector:	Photodiode
Display:	122x32 LCD, 16x4 line graphics display
Range:	0-125%T
Resolution:	1% FS
Accuracy:	2% FS
CE Mark:	Yes
Sample Cell:	25 mm round cell, 10 mm square cuvette, 16mm COD tubes
Power:	9V or AC adapter
Battery Life:	500 tests
Datalogging:	RS-232, time and date stamped
Calibration:	Factory set
Keypad	6-button membrane switch
Size	15 x 8 x 5.5 cm; 6 x 3.25 x 2.5 inches
Weight:	900 g (2 lbs.)

Test Factor	Range
Aluminum	0–0.3 ppm
Ammonia Nitrogen LR	0–1.0 ppm
Ammonia Nitrogen HR	0–3.0 ppm
Bromine LR	0–9.0 ppm
Chlorine	0–4.0 ppm
Chlorine Dioxide	0–7.0 ppm
Chromium	0–1.0 ppm
COD, Low	0–150 mg/L
COD, Standard	0–1,500 mg/L
COD, High	0–15,000 mg/L
Copper (BCA) LR	0–3.5 ppm
Copper (DDC)	0–6.0 ppm
Cyanide	0–0.5 ppm
Cyanuric Acid	0–200 ppm
Dissolved Oxygen	0–11 ppm
Fluoride	0–2.0 ppm
Hydrazine	0–1.0 ppm
Hydrogen Peroxide LR	0–1.5 ppm
Iodine	0–14.0 ppm
Iron (Bipyridyl)	0–5.0 ppm
Iron (1,10-Phenanthroline)	0–5.0 ppm
Lead	0–5.0 ppm
Manganese LR	0–0.5 ppm
Molybdenum HR	0–50 ppm
Nickel	0–0.8 ppm
Nitrate Nitrogen LR	0–3.0 ppm
Nitrite Nitrogen LR	0–0.8 ppm
Ozone LR	0–0.4 ppm
pH (CPR)	5.0–7.0
pH (PR)	6.6–8.4
pH (TB)	8–9.5
Phenols	0–6.0 ppm
Phosphate HR	0–70 ppm
Phosphate LR	0–3.0 ppm
Potassium	1.0–10.0 ppm
Silica LR	0–4.0 ppm
Silica HR	0–75 ppm
Sulfate HR	0–100 ppm
Sulfide LR	0–3.0 ppm
Tannin	0–10 ppm
Turbidity	0–400 FTU
Zinc LR	0–3 ppm